ATMOX

ATMOX AC Adapter for Fan/Light

The Power Adapter is used to provide power to an ATMOX 12VDC Fan or ATMOX LED Light when not used with the ATMOX Controls. The adapter plugs into a standard electrical outlet. The other side...

ATMOX Control - Dehumidifier Relay Kit (Aprilaire E-Series/Santa Fe Oasis)

This relay allows an ATMOX crawl space controller to control the operation of a dehumidifier with 24VAC terminal blocks.  The relay connects to the controller to receive its signals to turn a...

ATMOX Low Voltage Wire 14/2 (100ft)

This wire is used to connect and power ATMOX fans and/or lights to the ATMOX controllers for crawl spaces or attics. Each wire spool is 100 feet. Multiple wires or sections can easily...

ATMOX Vent Cover - Internal Mount - 5 Pack

This crawl space vent cover mounts from inside the crawl space behind an opening. The covers keep air flow blocked from the outside. The large plastic plate is attached to the wall with screws and a...

ATMOX ACE 2.0 Crawlspace Control Set

The ACE 2.0 controller is the ultimate crawl space controller bringing information to the homeowner through information and notifications and directing operation of components through...

ATMOX Crawlspace Essentials Package

ATMOX Crawl Space Essentials Package includes key components of the crawl space moisture control solution to bring information to the homeowner through information and notifications and direct...

ATMOX Fan - Intake - Multi-Mount with Louver - 225 CFM

This intake fan is specifically designed for a crawl space. The fan is attached to a 10 x 22 inch mounting plate and has a louver which means that the crawl space remains closed when the fan is not...

ATMOX Sensor - Wood Moisture

This wood moisture sensor works with an ATMOX controller to provide information on corresponding wood moisture content in the wood of the house. This information is shown on the controller display...

ATMOX Fan - Exhaust - Multi-Mount with Louver - 225 CFM

This exhaust fan is mounted on a 10 x 22 inch plate and has an optional louver (included). The louver can be added to keep the crawl space closed when the fan is not running. This fan is also used...

ATMOX Sensor - Water Alert

The water alert sensor works with an ATMOX controller to provide a notification of a potential water issue in the location of the sensor. It is typically placed by a sump pump or condensate line that...

ATMOX Fan - Joist Mount - 145 CFM

The joist-mounted fans have a unique design and application to reduce moisture in all areas of a crawl space. Fan mounts directly to a floor joist. It is easy to install and works well in circulating...

ATMOX Replacement Sensor - Temp/RH Outside with Hood v2

This type of temperature and humidity sensor is required with an ATMOX Controller and is included in all control sets. This sensor is for replacement only. The inside and outside sensor are the same...

ATMOX Fan - Joist Mount - 225 CFM

This joist-mounted fan has many different applications but is typically used for attic ventilation or with ducting attached in a crawl space or attic. The fans can be used to enhance intake air flow...

ATMOX Replacement Sensor - Temp/RH Inside/Outside v2

Sensor is for replacement only. This type of temperature and humidity sensor is required with an ATMOX Controller. All control sets include these required sensors. This sensor can be used to replace...

ATMOX APEX 2.0 Attic Control Set

The APEX 2.0 controller offers the best in attic heat and moisture control using smart ventilation. The APEX controller uses accurate sensors to monitor conditions by measuring temperature and...

ATMOX Fan – Exhaust – Interior Foundation Walls – 220 CFM

These exhaust fans are for use in crawl spaces. This crawl space fan is designed to fit behind most standard 8 x 16 inch vent openings. A benefit to internal mounting is that unique or aesthetic vent...

ATMOX Light – LED – 600 lm

The ATMOX LED Light is perfect for crawl space lighting or attic lighting. The lights are a huge help to all the service providers who work in or inspect your crawl space or attic. The lights are LED...

ATMOX Supplies Kit - Low Voltage Wiring

This kit provides some spare parts for installing ATMOX components such as fans, lights, or dehumidifier adapter kits. These parts are generally included with components, but extra quick splice...

ATMOX Supplies Kit – Sensor Cables

This kit provides some spare parts for installing or replacing sensors for ATMOX controllers.   This kit includes the following items: - Crimping Tool for RJ11 jacks - Extension cables with...

ATMOX Fan – Intake – Interior Foundation Walls – 220 CFM

These intake fans are for use in crawl spaces. This crawl space fan is designed to fit behind most standard 8 x 16 inch vent openings. A benefit to internal mounting is that unique or aesthetic vent...

ATMOX Mounting Plate – Double (22 x 10)

The mounting plate is used to mount two of the ATMOX Multi-Mount fans together in one location. It is typically used to mount fans behind an attic gable or crawl space vent opening...