Product Description
The standard 1-1/4″ – 1-1/2″ slip x slip full flow check valve is designed for basement sump pump or drain pump applications. The rubber coupling with stainless steel clamps on each side of the check valve allow for quick and easy connection to SCH40 PVC. It can spliced into an existing line very easily as well. It is also designed to be used in either a vertical or horizontal orientation. The full-flow design of this check valve allows the internal flapper to open to match the internal diameter of the connected line. So you never have to be concerned about the pump passing solids that the valve is unable to handle. Peace of mind right out of the box!
1½" or 1¼" slip X slip union
Flapper bends over a radius, no sharp 90° edges — lengthens life of flapper hinge.
PVC plastic check body, ultrasonically welded and can be solvent welded for rigid
pressure rated piping systems to 25 PSI - (57 ft. of Head) at 130°F.
Vertical or horizontal installation.
Slip x slip for 4.3 PSI (10 ft. of Head) at 130°F. Avoid more than 10 ft. static head
above the check valve.
Designed to reduce water hammer.
