Atmospheric Control Systems

ATMOX Control - 24VAC Relay Kit (Aprilaire/Mega Dry/Santa Fe Ultra)

This relay kit allows an ATMOX crawl space controller to control the operation of a components with 24VAC terminal blocks. The kit connects to the controller to receive its signals to turn components on and off. The relay kit can control two different...

ATMOX Dehumidifier Plug-In Relay Kit 2.0 (Santa Fe Compact)

This relay kit allows an ATMOX crawl space controller to control the operation of a dehumidifier. The kit connects to the controller with low voltage wire to receive its signals to turn on and off. The dehumidifier plugs into this relay kit, and the kit...

ATMOX Vent Cover - Internal Mount - 5 Pack

This crawl space vent cover mounts from inside the crawl space behind an opening. The covers keep air flow blocked from the outside. The large plastic plate is attached to the wall with screws and a drill or powder/gas/battery actuated nail gun. Item is...

ATMOX Low Voltage Wire 14/2 (100ft)

This wire is used to connect and power ATMOX fans and/or lights to the ATMOX controllers for crawl spaces or attics. Each wire spool is 100 feet. Multiple wires or sections can easily connect together to reach the distance of fans or...

ATMOX AC Adapter for Fan/Light

The Power Adapter is used to provide power to an ATMOX 12VDC Fan or ATMOX LED Light when not used with the ATMOX Controls. The adapter plugs into a standard electrical outlet. The other side connects to the fan or light. Once plugged in, the unit...

ATMOX Crawlspace Essentials Package

ATMOX Crawl Space Essentials Package includes key components of the crawl space moisture control solution to bring information to the homeowner through information and notifications and direct operations of components through dehumidification,...

ATMOX Sensor - Wood Moisture

This wood moisture sensor works with an ATMOX controller to provide information on corresponding wood moisture content in the wood of the house. This information is shown on the controller display and can trigger an alert if wood moisture content is too...

ATMOX Fan - Intake - Multi-Mount with Louver - 225 CFM

This intake fan is specifically designed for a crawl space. The fan is attached to a 10 x 22 inch mounting plate and has a louver which means that the crawl space remains closed when the fan is not running.   Specifications Output: 225...

ATMOX ACE 2.0 Crawlspace Control Set

The ACE 2.0 controller is the ultimate crawl space controller bringing information to the homeowner through information and notifications and directing operation of components through dehumidification, ventilation, and circulation for proper moisture...

ATMOX Sensor - Water Alert

The water alert sensor works with an ATMOX controller to provide a notification of a potential water issue in the location of the sensor. It is typically placed by a sump pump or condensate line that could have an issue creating a water backup. The...

ATMOX Fan - Exhaust - Multi-Mount with Louver - 225 CFM

This exhaust fan is mounted on a 10 x 22 inch plate and has an optional louver (included). The louver can be added to keep the crawl space closed when the fan is not running. This fan is also used without the louver in attics for placement in ridge vents...

ATMOX Replacement Sensor - Temp/RH Outside with Hood v2

This type of temperature and humidity sensor is required with an ATMOX Controller and is included in all control sets. This sensor is for replacement only. The inside and outside sensor are the same type of sensor. This sensor includes the outside hood...

ATMOX Fan - Joist Mount - 145 CFM

The joist-mounted fans have a unique design and application to reduce moisture in all areas of a crawl space. Fan mounts directly to a floor joist. It is easy to install and works well in circulating air throughout the crawl space. Fans are powered...

ATMOX Replacement Sensor - Temp/RH Inside/Outside v2

Sensor is for replacement only. This type of temperature and humidity sensor is required with an ATMOX Controller. All control sets include these required sensors. This sensor can be used to replace an outside sensor if hood cover is still in place. This...

ATMOX Fan - Joist Mount - 225 CFM

This joist-mounted fan has many different applications but is typically used for attic ventilation or with ducting attached in a crawl space or attic. The fans can be used to enhance intake air flow from a gable or soffit or just to improve cross...

ATMOX Supplies Kit – Sensor Cables

This kit provides some spare parts for installing or replacing sensors for ATMOX controllers.   This kit includes the following items: - Crimping Tool for RJ11 jacks - Extension cables with couplers (25’) – Quantity 4 - RJ11 Plug for...

ATMOX Vent Cover – External Mount (Solid/Open) – 5 pack

This crawl space vent grill cover is designed to fit in a standard 16 X 8 inch opening. The vent cover mounts from the outside and tighten in place with four screws. The vent cover has a solid back to keep airflow blocked from the outside. The solid back...

ATMOX Light – LED – 600 lm

The ATMOX LED Light is perfect for crawl space lighting or attic lighting. The lights are a huge help to all the service providers who work in or inspect your crawl space or attic. The lights are LED and extremely bright with 600 lumens. The energy usage...

ATMOX Fan – Exhaust – Interior Foundation Walls – 220 CFM

These exhaust fans are for use in crawl spaces. This crawl space fan is designed to fit behind most standard 8 x 16 inch vent openings. A benefit to internal mounting is that unique or aesthetic vent covers on the house can remain untouched. Fan is...

ATMOX APEX 2.0 Attic Control Set

The APEX 2.0 controller offers the best in attic heat and moisture control using smart ventilation. The APEX controller uses accurate sensors to monitor conditions by measuring temperature and humidity both inside the attic and outside. This information...

ATMOX Supplies Kit - Low Voltage Wiring

This kit provides some spare parts for installing ATMOX components such as fans, lights, or dehumidifier adapter kits. These parts are generally included with components, but extra quick splice connectors may be necessary in a very large space or unusual...

ATMOX Fan – Intake – Interior Foundation Walls – 220 CFM

These intake fans are for use in crawl spaces. This crawl space fan is designed to fit behind most standard 8 x 16 inch vent openings. A benefit to internal mounting is that unique or aesthetic vent covers on the house can remain untouched. Fan is...

ATMOX Mounting Plate – Double (22 x 10)

The mounting plate is used to mount two of the ATMOX Multi-Mount fans together in one location. It is typically used to mount fans behind an attic gable or crawl space vent opening.   Specifications Assembly: Plates assemble to fans with...

ATMOX - Fan - Exhaust - External Mount - 220 CFM

This exhaust fan is designed to fit directly into a standard 8 x 16 inch crawl space vent opening. Fan is designed with a vent cover and is mounted from the outside of the crawl space. The vent cover can be removed for use in smaller vent openings...